Veronica Vest

Product Description

This fully lined designer vest that has loads of design features including an asymmetrical front zip and back hem darts. The shoulder and side panels are extended to become almost a sleeve that falls to cover the top of the arm. The front and back yokes and the hip seam allow you to create a very individual look by colour blocking or using different textures.

Fabric Suggestion & Description

Any woven fabric – linen, drill, suiting. Leather or Ponte knit

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Pattern Measurements Based On A Size 10 Pattern

Bust = 104 cm or 41”
Waist = 100 cm or 39.5”
Hip = 100 cm or 39.5”
Extended shoulder = 58 cm or 23”
Centre back length = 80 cm or 31.5”

Trims

1 x open-end metal zip - 54 cm or 21” long for sizes 4 - 18; 60 cm or 24” long for sizes 20 - 30
1 x line stud 15mm or 0.6” diameter

main Fabric

Fabric Width	Sizes 4 - 12	Sizes 14 - 18	Sizes 20 - 30
110 cm / 44 in	220 cm / 2.4 yards	240 cm / 2.6 yards	300 cm / 3.3 yards

lining

Fabric Width	Sizes 4 - 12	Sizes 14 - 18	Sizes 20 - 30
110 cm / 44 in	130 cm / 1.4 yards	140 cm / 1.59 yards	185 cm / 2 yards

fuse

Fabric Width	All Sizes
90 cm / 36 in	100 cm / 39 inches

Sizing Help

Size Chart - CM

Size	A. Shoulder Breadth (cm)	B. Upper Arm Girth (cm)	C. Bust (cm)	D. Waist (cm)	E. Hip (cm)
4	34.4	26.4	77	60	83
6	35.6	27.6	82	65	88
8	36.8	28.8	87	70	93
10	38	30	92	75	98
12	39.2	31.2	97	80	103
14	40.4	32.4	102	85	108
16	41.6	33.6	107	90	113
18	42.8	34.8	112	95	118
20	44	36	118	100	124
22	45.2	37.2	124	106	130
24	46.4	38.4	130	112	136
26	47.6	39.6	136	118	142
28	48.8	40.8	142	124	148
30	50	42	148	130	154

Size Chart - Inches

Size	A. Shoulder Breadth (inches)	B. Upper Arm Girth (inches)	C. Bust (inches)	D. Waist (inches)	E. Hip (inches)
4	13.5	10.5	30.3	23.5	32.6
6	14	10.9	32.3	25.5	34.6
8	14.5	11.3	34.3	27.5	36.6
10	15	11.8	36.2	29.5	38.6
12	15.4	12.3	38.2	31.5	40.6
14	15.9	12.8	40.2	33.5	42.5
16	16.4	13.2	42.1	35.5	44.5
18	16.9	13.7	44.1	37.5	46.5
20	17.3	14.2	46.5	39.5	48.8
22	17.8	14.6	48.8	42	51.2
24	18.3	15.1	51.2	44.5	53.5
26	18 3/4	15 5/8	53 1/2	46.5	56
28	19 1/4	16 1/8	56	48.5	58 1/4
30	19 3/4	16 5/8	58 1/4	50.5	61

Size Conversion Table

ALPHA SIZING	AUSTRALIA	UK	US	FRANCE	ITALY	JAPAN
XXS	6	6	2	34	38	5
XS	8	8	4	36	40	7
S	10	10	6	38	42	9
M	12	12	8	40	44	11
L	14	14	10	42	46	13
XL	16	16	12	44	48	15
XXL	18	18	14	46	50	17

How Do I Know What Size I Am?

Choosing your pattern size is the most important step and we will help you determine this with these easy to follow steps.

When taking your measurements ensure that you take them against your skin and not over clothing. One can wear a comfortable bra and knickers whilst measuring, as this will provide you with the most accurate measurements.
Tape measure has to sit firmly around the points you are measuring. But be careful not to pull it too tight, as this will give you the incorrect size.
When measuring circumferences (B, C, D, E) it is important to note that the tape measure must remain parallel to the floor. It is sometimes best to take the measurements in front of a mirror; this will help you see the angle of the tape measure.
You will only require the basic body measurements to determine your pattern size which is indicated on our mannequin below:

A. Shoulder Breadth

Place the tape at the edge of the shoulder. Measure along the top of the shoulder blade/across the highest point of the shoulders to the other edge, following the natural slope and allow an extra finger for ease of any movement.

B. Upper Arm Girth

This point is taken as a circumference at your widest point of your upper arm.

C. Bust

This point is taken as a circumference parallel to the floor at the fullest part of your chest.

D. Waist

This point is taken as a circumference and taken at the smallest part of your waist.

E. Hip

This point is taken as a circumference parallel to the floor at the widest part of your hips.

Product Enquiry

Name
First Last
Email*
Message*
Email
This field is for validation purposes and should be left unchanged.