Amanda Stretch Short

Product Description

The waist/yoke of this long line short makes it truly comfortable, this will be your go to short for those summer months this short is perfect to wear when you are having a game of golf. The turn up cuff along with twin needling makes this a very fashionable short.

Fabric Suggestion

Bengaline, or any stretch woven with approx. 25% stretch.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Pattern Measurements Based On Size 10

There is 5cm or 2” grade between each size
Waist before elastic = 77cm or 29.5
Waist with elastic = 72 cm or 28.25”
Hip = 95 cm or 37.5”
Total crotch = 66 cm or 26”
Leg opening = 32cm or 12.50”
Inleg length = 77 cm or 30.25”
Knee circumference = 38 cm or 15”

Trims

Elastic 2cm or ¾” wide (see below charts for length measurement for your size)

FABRIC ESTIMATE (cut 2-way on the open):
Fabric Width	Sizes 4 - 8	Sizes 10 - 16	Sizes 18 - 24	Sizes 26 - 30
148 cm / 58 in	100 cm / 1.1 yards	110 cm / 1.2 yards	140 cm / 1.5 yards	175 cm / 1.9 yards

ELASTIC (finished measurement, allow 2cm or ¾" for seams):
Size	4	6	8	10	12	14	16	18	20	22	24	26	28	30
CM	57	62	67	72	77	82	87	92	97	102	107	112	117	122
IN	22.5	24.4	26.4	28.4	30.3	32.3	34.3	36.2	38.2	40.2	42.1	44	46	48

Sizing Help

Size Chart - CM

Size	A. Shoulder Breadth (cm)	B. Upper Arm Girth (cm)	C. Bust (cm)	D. Waist (cm)	E. Hip (cm)
4	34.4	26.4	77	60	83
6	35.6	27.6	82	65	88
8	36.8	28.8	87	70	93
10	38	30	92	75	98
12	39.2	31.2	97	80	103
14	40.4	32.4	102	85	108
16	41.6	33.6	107	90	113
18	42.8	34.8	112	95	118
20	44	36	118	100	124
22	45.2	37.2	124	106	130
24	46.4	38.4	130	112	136
26	47.6	39.6	136	118	142
28	48.8	40.8	142	124	148
30	50	42	148	130	154

Size Chart - Inches

Size	A. Shoulder Breadth (inches)	B. Upper Arm Girth (inches)	C. Bust (inches)	D. Waist (inches)	E. Hip (inches)
4	13.5	10.5	30.3	23.5	32.6
6	14	10.9	32.3	25.5	34.6
8	14.5	11.3	34.3	27.5	36.6
10	15	11.8	36.2	29.5	38.6
12	15.4	12.3	38.2	31.5	40.6
14	15.9	12.8	40.2	33.5	42.5
16	16.4	13.2	42.1	35.5	44.5
18	16.9	13.7	44.1	37.5	46.5
20	17.3	14.2	46.5	39.5	48.8
22	17.8	14.6	48.8	42	51.2
24	18.3	15.1	51.2	44.5	53.5
26	18 3/4	15 5/8	53 1/2	46.5	56
28	19 1/4	16 1/8	56	48.5	58 1/4
30	19 3/4	16 5/8	58 1/4	50.5	61

Size Conversion Table

ALPHA SIZING	AUSTRALIA	UK	US	FRANCE	ITALY	JAPAN
XXS	6	6	2	34	38	5
XS	8	8	4	36	40	7
S	10	10	6	38	42	9
M	12	12	8	40	44	11
L	14	14	10	42	46	13
XL	16	16	12	44	48	15
XXL	18	18	14	46	50	17

How Do I Know What Size I Am?

Choosing your pattern size is the most important step and we will help you determine this with these easy to follow steps.

When taking your measurements ensure that you take them against your skin and not over clothing. One can wear a comfortable bra and knickers whilst measuring, as this will provide you with the most accurate measurements.
Tape measure has to sit firmly around the points you are measuring. But be careful not to pull it too tight, as this will give you the incorrect size.
When measuring circumferences (B, C, D, E) it is important to note that the tape measure must remain parallel to the floor. It is sometimes best to take the measurements in front of a mirror; this will help you see the angle of the tape measure.
You will only require the basic body measurements to determine your pattern size which is indicated on our mannequin below:

A. Shoulder Breadth

Place the tape at the edge of the shoulder. Measure along the top of the shoulder blade/across the highest point of the shoulders to the other edge, following the natural slope and allow an extra finger for ease of any movement.

B. Upper Arm Girth

This point is taken as a circumference at your widest point of your upper arm.

C. Bust

This point is taken as a circumference parallel to the floor at the fullest part of your chest.

D. Waist

This point is taken as a circumference and taken at the smallest part of your waist.

E. Hip

This point is taken as a circumference parallel to the floor at the widest part of your hips.

Product Enquiry

Name
First Last
Email*
Message*
Phone
This field is for validation purposes and should be left unchanged.