Carly Jumpsuit

Product Description

This very stylish jumpsuit features a cross-over blouson bodice with tucks falling from the shoulder line, into the channelled elastic waistline. This pant has no side seams. Optional welt pockets and a false fly.

Fabric Suggestion & Description

Crepe, Silk, Rayon

Pattern Format

	Single-Size Hard Copy
	Single-size hard copy sewing pattern, mailed to your delivery address.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Pattern Measurements Based On Size 10 Pattern

Bust = 105 cm or 41 in
Waist elastic = 67 cm or 27 in
Hip = 102 cm or 40 ½ in
Inside leg = 80 cm or 31 ½ in
Shoulder breadth = 40 cm or 15 ½ in
Knee circumference = 40 cm or 15 ½ in
Hem circumference = 34 cm or 13 ¼ in

Trims

1 x small stud to secure crossover
Elastic (see below for measurements)

fabric Estimate

Fabric Width	Sizes 4 to 18	Sizes 20 to 30
110 cm / 44 in	310 cm / 3.4 yards	360 cm / 4 yards
148 cm / 58 in	240 cm / 2.6 yards	260 cm / 2.8 yards

fuse

Fabric Width	Sizes 4 to 18	Sizes 20 to 30
90 cm / 36 in	15 cm / 6 in	20 cm / 8 in

elastic (Finished Measurement)

Size	4	6	8	10	12	14	16	18	20	22	24	26	28	30
CM	52	57	62	67	72	77	82	87	92	97	102	107	112	117
IN	21	23	25	27	29	31	33	35	37	39	41	43	45	47

Sizing Help

Size Chart - CM

Size	A. Shoulder Breadth (cm)	B. Upper Arm Girth (cm)	C. Bust (cm)	D. Waist (cm)	E. Hip (cm)
4	34.4	26.4	77	60	83
6	35.6	27.6	82	65	88
8	36.8	28.8	87	70	93
10	38	30	92	75	98
12	39.2	31.2	97	80	103
14	40.4	32.4	102	85	108
16	41.6	33.6	107	90	113
18	42.8	34.8	112	95	118
20	44	36	118	100	124
22	45.2	37.2	124	106	130
24	46.4	38.4	130	112	136
26	47.6	39.6	136	118	142
28	48.8	40.8	142	124	148
30	50	42	148	130	154

Size Chart - Inches

Size	A. Shoulder Breadth (inches)	B. Upper Arm Girth (inches)	C. Bust (inches)	D. Waist (inches)	E. Hip (inches)
4	13.5	10.5	30.3	23.5	32.6
6	14	10.9	32.3	25.5	34.6
8	14.5	11.3	34.3	27.5	36.6
10	15	11.8	36.2	29.5	38.6
12	15.4	12.3	38.2	31.5	40.6
14	15.9	12.8	40.2	33.5	42.5
16	16.4	13.2	42.1	35.5	44.5
18	16.9	13.7	44.1	37.5	46.5
20	17.3	14.2	46.5	39.5	48.8
22	17.8	14.6	48.8	42	51.2
24	18.3	15.1	51.2	44.5	53.5
26	18 3/4	15 5/8	53 1/2	46.5	56
28	19 1/4	16 1/8	56	48.5	58 1/4
30	19 3/4	16 5/8	58 1/4	50.5	61

Size Conversion Table

ALPHA SIZING	AUSTRALIA	UK	US	FRANCE	ITALY	JAPAN
XXS	6	6	2	34	38	5
XS	8	8	4	36	40	7
S	10	10	6	38	42	9
M	12	12	8	40	44	11
L	14	14	10	42	46	13
XL	16	16	12	44	48	15
XXL	18	18	14	46	50	17

How Do I Know What Size I Am?

Choosing your pattern size is the most important step and we will help you determine this with these easy to follow steps.

When taking your measurements ensure that you take them against your skin and not over clothing. One can wear a comfortable bra and knickers whilst measuring, as this will provide you with the most accurate measurements.
Tape measure has to sit firmly around the points you are measuring. But be careful not to pull it too tight, as this will give you the incorrect size.
When measuring circumferences (B, C, D, E) it is important to note that the tape measure must remain parallel to the floor. It is sometimes best to take the measurements in front of a mirror; this will help you see the angle of the tape measure.
You will only require the basic body measurements to determine your pattern size which is indicated on our mannequin below:

A. Shoulder Breadth

Place the tape at the edge of the shoulder. Measure along the top of the shoulder blade/across the highest point of the shoulders to the other edge, following the natural slope and allow an extra finger for ease of any movement.

B. Upper Arm Girth

This point is taken as a circumference at your widest point of your upper arm.

C. Bust

This point is taken as a circumference parallel to the floor at the fullest part of your chest.

D. Waist

This point is taken as a circumference and taken at the smallest part of your waist.

E. Hip

This point is taken as a circumference parallel to the floor at the widest part of your hips.

Product Enquiry

Name
First Last
Email*
Message*
Email
This field is for validation purposes and should be left unchanged.